Is your Kenmore refrigerator’s water tasting a little off lately? It might be time to replace the water filter! Don’t worry, we’ve got you covered with an easy step-by-step guide on how to replace the filter yourself. Say goodbye to funky tasting water and hello to crisp, clean hydration in no time!
If you own a Kenmore refrigerator with a built-in water filter, it’s crucial to regularly replace the filter to ensure that your water remains clean and fresh-tasting. Here’s a detailed guide on how to replace the water filter on your Kenmore refrigerator:
Firstly, you need to determine the type of water filter that is compatible with your specific model of Kenmore refrigerator. This information can usually be found on a sticker inside the fridge or in the owner’s manual. Once you have the model number, purchase the correct replacement water filter.
Next, locate the water filter inside your refrigerator. It is typically situated in the upper right corner of the fridge compartment or in the base grille. Refer to the owner’s manual for the exact location in your particular Kenmore refrigerator model.
Before installing the new water filter, ensure it is prepared correctly. Take it out of its packaging and remove any protective covers or seals. Some filters may require flushing with water before installation, so make sure to follow the instructions provided.
To remove the old water filter, turn it counterclockwise until it releases from the filter housing. Pull the old filter straight out to remove it from the refrigerator.
Insert the new water filter into the filter housing and turn it clockwise until it locks into place securely. This will prevent any potential leaks.
After installing the new water filter, run a few gallons of water through it to flush out any air or carbon particles. This will guarantee that the water coming out of the filter is clean and free of impurities.
Many Kenmore refrigerators come with a filter indicator light that signals when it’s time to replace the water filter. After replacing the filter, reset the indicator light as per the instructions in the owner’s manual.
By following these easy steps, you can effortlessly replace the water filter in your Kenmore refrigerator and enjoy clean, fresh water throughout the year. Remember to replace the filter every 6 months or as recommended by the manufacturer to maintain optimal water quality.
1. How often should I replace the water filter in my Kenmore refrigerator?
– It is recommended to replace the water filter every 6 months to ensure clean and fresh tasting water.
2. How do I know when it’s time to replace the water filter in my Kenmore refrigerator?
– Most Kenmore refrigerators have a filter status indicator light that will turn on when it’s time to replace the filter. You can also check the water flow for any signs of decreased water pressure.
3. How do I replace the water filter in my Kenmore refrigerator?
– To replace the water filter, locate the filter cartridge inside the refrigerator and turn it counterclockwise to remove. Insert the new filter and turn it clockwise to secure it in place. Run a few gallons of water through the dispenser to flush out any air or carbon particles before using the water.
